|
We are cutting about 3 3/4" deep in all of the big timbers with a smooth as glass finish. We are using this saw with a Freud, 40 tooth Diablo 10 1/4" blade to cut our timber frame house.
So. I can due virtually anything a worm drive can do with my little 10.5 Amp makita circular saw. The Makita cuts 6-1/4 inches deep, the Big Foot 14 cuts 5-3/4 inches deep. (As of writing this, Amazon still isn't selling the saw. except convert it to a 10-1/4 Circular saw.However, who really needs 10-1/4. Grown men act like babbling little boys running for the ice cream truck whenever they hear the words "worm drive". The advantage of the Big Foot is that it weighs half as much as the Makita. I suspect that when this conversion kit was invented, 2x4 walls were code.
This saw will only cut through a "nominal" 4x4. There is a Worm Drive cult in the carpentry world. I too can't resist the siren call of the worm-driven saw, even if it's going to cost me $50 dollars more.However, if you *really* want a saw that cut's everything, the Makita 5402A or 5402NA is the saw you want. This circular saw really will cut just about all your beams in one pass and will gang cut a modern stick framed wall. Makita's new 5008MGA, Magnesium 8-1/4 Inch SideWinder cuts 3 inches deep, 3/4 of an inch less than the Big Foot for twice the price.
In those days, this saw could gang cut your studs, but no longer, unless you're not building to code.If you want to cut through doubled plates, then an 8-1/4 inch saw will do the same for a fraction of the cost and far less weight. I've used the Big Foot 14 incher. The Makita costs less.The Big Foot 14 inch saw looks cooler.Choose wisely. I own the Makita. if you want to build that log cabin or timber frame out of true 4x4's, this saw won't help you. The only saw that competes with it might be the Big Foot 14 Inch Circular Saw. There's no doubt that they are fine saws, and powerful, but take a deep breath.
It's relatively new).If you just have to have a 10-1/4 saw, then I would probably choose the Big Foot over the Makita 5201NA 10-1/4-Inch Circular Saw. You'll need at least 5-1/2 inches to gang cut the modern stick framed house. If you are going to be cutting green 4x4's, this saw will not cut through them. Or, if you want to gang cut a stick framed house, this saw won't help you.
If you're cutting 4x stock, you shouldn't be without one of these. I've been using the Big Foot for several years now. I'm really happy with this saw. It performs just as I expected.
The large cast foot keeps it very stable, it feels very solid during the cut.If you are looking for a saw of this size, this is a good choice, at a good price. I must admit, I have never tried to cut anything small with this saw, and it would probably be somewhat awkward to do so. A Great saw.I love this saw.I purchased this one to square out large Wood Table Slabs, and it does the job well. Tons of power, cuts through thick Table Slabs without bogging down, clean and straight.
I have the 16" makita saw for larger beams and a few 7 1/4" worm drives for everyday use but the big foot light enough to use like a skill saw and has earned its keep. This saw has become a must have for me. This is a great tool for standard 2x4 framing. perfect for cutting 2 plates at once and for cutting all 4x headers.
|
